EN 

User Manual Rev 0.0

Navi800 Ultra  Smart Bicycle Front Light

1. Product Specification

Product Name: Navi800 Ultra Smart Front Light

Dimensions:  L:106.5mm W:31mm D:35mm 

Fig.1

Fig.2

2. Accessories

Fig.3

3. Operation and functionality

Navi800 Ultra integrated two powerful LEDs which allows user to switch between high beam/low beam individually.

Navi800 Ultra support Auto, it comes with a motion sensor which allow the light to detect if the user is moving the bike and turning on/off the light automatically. The Navi800 Ultra integrated with high sensitive sensor which allow contorl the power by Ambient Brightness in Full-Auto mode.

Key Function:

Note:*When operating in Auto-mode the light will be turn on again if movement is detected.

Full-Auto/Semi-Auto/Manual mode

The Navi800 Ultra supports three operation mode:Full-Auto, Semi-Auto and Manual mode. The three operation modes can be changed between by double clicks the button.

Fig.4

4. Charge the battery

Charge the battery

Remove the rubber seal on the bottom of Navi800 Ultra and charge the battery via the USB connector，the charge indicator as show in Fig.2 will turn on Red. Battery will be fully charge in 2~3 hours. Charge indicator will turn on red when charging is in progress and will turn green when charge completed.

Replace the battery

The battery can be remove/replace by turning the cartridge clockwise or anti-clockwise as below:

Fig.5

5. Installation

Handlebar mount(Standard mount only):

Mount the handlebar bracket ① to the handlebar and insert in the Navi800 Ultra ②, rotate the Navi800 Ultra 90 degree as below:

Fig.6

Cycle computer mount(Reverse Mount only)

Install the GoPro adaptor to a standard cycle computer bracket (with GoPro mount), then insert the Navi800 Ultra and turn 90degree as below.

Fig.7

6. Warranty

The Navi800 Ultra is covered by a one year warranty.

Dongguan Enfitnix Technology Co., Ltd.

www.enfitnix.com

Customer Service: ecs@enfitnix.com

© 2026 by Enfitnix Technology.