1. Product Specification

Product Name: Navi800Y Smart Bicycle Light

Dimensions: L:105mm W:32.1mm D:34mm

Fig.1

Operation Mode	Auto/Manual
Battery	3350mAh rechargeable Lithium-ion battery
Run Time	8.4hrs@200Lm, 3.7hrs@374Lm, 2.2hrs@572Lm, 1.5hrs@800Lm
Weight	139G（Including mounting bracket）
Color:	Black
Waterproof	IPx6

2. Package Content

3. Operation and functionality

Navi800Y comes with a motion sensor which allow the light to detect if the user is moving the bike and turning on/off the light automatically.

Key Function:

Operation	Function
Single Click	Change the output power or turn on the light
Double Click	Switch between Auto mode and manual mode
Press down > 1s	Switch off *

Note:*When operating in Auto-mode the light will be turn on again if motion is detected .

Auto/Manual mode

The Navi800Y supports two operation modes which can be changed between the two modes by double clicks the button.

4. Charge the battery

Charge the battery

Remove the rubber seal ① on the bottom of Navi800Y and charge the battery via the USB connector. Navi800Y will be fully charged in 2~3 hours. Charge indicator ② will turn on red when charging is in progress and will turn on green when charge completed.

Replace the battery

The battery can be remove/replace by turning the cartridge clockwise or anti-clockwise as below:

Fig.3

5. Installation

Handlebar mount:

Mount the handlebar bracket ① to the handlebar and slide in the Navi800Y ②.

Fig.4

Cycle Computer Mount (GroPro Adaptor)

Install the GoPro adaptor ① to a standard cycle computer bracket (with GoPro mount). Then slide in the Navi800Y ②. Make sure keep the button on the top③.

Fig.5

6. Warranty

The Navi800Y is covered by a one year warranty.

Dongguan Enfitnix Technology Co., Ltd.

www.enfitnix.com

Customer Service: ecs@enfitnix.com

Navi800Y User Manual