1. Product Specification

Product Name: Navi500 Smart Front Light

Dimensions: L:105mm W:31mm D:34mm

Fig.1

Operation Mode	Auto/Manual
Battery	2500mAhrechargeable Lithium-ion battery
Run Time	5.6hrs@200Lm, 4.2hrs@300Lm, 3.0hrs@400lm, 2.0hrs@530Lm
Weight	139G（Including mounting bracket）
Color:	Black
Waterproof	IPx6

2. Accessories

3. Operation and functionality

Navi500 comes with a motion sensor which allow the light to detect if the user is moving the bike and turning on/off the light automatically.

Key Function:

Operation	Function
Single Click	Change the output power or turn on the light
Double Click	Switch between Auto mode and manual mode
Press down > 1s	Switch off *

Note:*When operating in Auto-mode the light will be turn on again if motion is detected .

Auto/Manual mode

The Navi500 supports two operation modes which can be changed between the two modes by double clicks the button.

4. Charge the battery

Charge the battery

Remove the rubber seal ① on the bottom of Navi500 and charge the battery via the USB connector，the charge indicator ② will turn on Red. Battery will be fully charge in 2~3 hours. Charge indicator ② will turn red when charging is in progress and will turn green when charge completed.

Fig.2

Replace the battery

The battery can be remove/replace by turning the cartridge clockwise or anti-clockwise as below:

5. Installation

Handlebar mount:

Mount the handlebar bracket ① to the handlebar and slide in the Navi500 ②.

Fig.4

Cycle Computer Mount (GroPro Adaptor)

Install the GoPro adaptor ① to a standard cycle computer bracket (with GoPro mount). and slide in the Navi500 ②. Make sure keep the button on the top③.

Fig.5

6. Warranty

The tail light is covered by a one year warranty.

Dongguan Enfitnix Technology Co., Ltd.

www.enfitnix.com

Customer Service: ecs@enfitnix.com

Navi500 User Manual