User Manual Rev.0.0

CubeLiteIII

Smart Tail Light

DongGuan Enfitnix Technology Co., Ltd.

Please Note: Specification are subject to change without notice.

© 2022 by Enfitnix Technology.

1. Product Specification

Product Name: Cubelite III Smart Bicycle Tail Light

Dimensions:

Fig. 1

Mode: Flash1, Flash2, Breath, Constant on

Luminous Flux: 30Lm（max）

Battery: 400mAh rechargeable Lithium-ion battery

Run Time: 9.7~37hrs（without braking）

Weight: 32.8g (Saddle mount), 36g (Seat post mount)

Color: Black

Waterproof: IPx6

Input: DC 5V<300mA(max)

2. Product description

①USB Port

②Charge Indicator

③Auto Mode Indicator

④Main Light

⑤Brake Light

⑥Function Button

Fig. 2

Fig. 3

3. Package Contents

Fig. 4

4. Operation and functionality

Cubelite III integrated with a high sensitive MEN’s sensor which allow the light to detect whether the bike is slowing down. The high output rate allow better response on bike angle change and therefore ensure much accurate braking detection. The powerfull 32-bit ARM processor ensure quicker response to braking.

The Cubelite III also inherit the feature from it's product family - Auto start when motion is detected and Auto switch off if no motion is detected for 10s.

Function button

The functionality of the button is described as below:

Note:

*The “AUTO”LED indicator will start to blink when operate under Auto mode.

**The light will be reactivate in“Auto”mode if motion detected.

Operation and functionality are described shown as below:

Fig. 5

Note：*Only the button can turn off the light when operating under“Manual”mode.

5. Installation

Seatpost mount

1. Tighten the Seatpost Mount Bracket with an o-ring rubber band .

Fig. 6

2. Fit the CubeliteIII on the seatpost mounting bracket.

Fig. 7

Saddle mount

1. Place the mounting bracket on the seat rails and tighten with the zip-ties. Cut excess length off if need.

Fig. 8

2. Insert the CubeliteIII and turn clockwise or anti-clockwise until the light is click-in.

Fig. 9

3. Charge the battery

When the Cubelite III need to be charge the low battery is start to flash(see Fig. 5). To charge the battery, Open the seal and charge the battery through the USB TypeC port ① in Fig. 3. The battery will be fully charged in about 2~3 hours. The green light② will be turned on if charge completed.

4. Warranty

The tail light is covered by one year warranty.

DongGuan Enfitnix Technology Co., Ltd.

Room 453,ShengChanLi Building, SongShanHu, Dongguan, Guangdong, China,Postcode:523000

Customer Service: ecs@enfitnix.com

Tel: +86 (0)768 2223 4810

Please Note: Specification are subject to change without notices.

© 2022 by Enfitnix Technology.

Made In China