EN

User Manual Rev.0.1

XLite100 Smart Tail Light

1. Product Specification

Product Name: XLite100 Smart Tail Light

Dimensions:  L:45mm W:57mm D:34mm

Mode:Flash, Breath, Always On

Distance: 200m

Battery: 400mAh rechargeable Lithium-ion battery

Run Time: 20hrs+

Weight（Including mounting bracket）:40G

Color: Black

Waterproof: IPx6

2. Accessory

3. Operation and functionality

XLite100 integrated accelerometer which allow the light to detect if the bike is slowing down. Then automatically change from flash mode to the“brake” mode.

Also, the light is able detect the ambient light intensity/motion and automatically tuning on or off .

Front bottom

The front bottom is used to change the flash mode or turn off the light.

Note:*When operating in Auto-mode the light will be turn on again if motion is detected .

Auto/Manual mode switch

The XLite100 support two operation modes which can be changed by the switch on the back panel as shown as below:

Operation and Function are described shown as below:

4. Installation

Step1:Place the light on the seat rails and keep the light horizontal.

Step2:Tighten the nylon cable ties and cut off the rest.

Step 3: Twist the tail light into the spiral mount and make sure it is firmly secured.

5. Number Plate Bracket (Optional part)

The Number plate bracket can be install on the EasySnap mounting bracket as shown as below:

6. Charge the battery

Unscrew the tail light and connect to a standard micro-usb cable to recharge the battery. Battery will be fully charge in around 2 hours.

7. Warranty

The tail light is covered by a one year warranty.

东莞市英豪智能科技有限公司

DongGuan ENFITNIX Technology Ltd.

注：规格书可能在未通知的情况下更改。

Please Note:Specification are subject to change without notices.

© 2017 by ENFITNIX Technology Ltd.