User ManualRev.0.0
CubeLiteII Smart Tail Light

Product Name: CubeLite II Smart Bicycle Tail Light
Dimensions:

Mode: Flash, Breath, Constant on
Luminous Flux: 30Lm
Battery: 400mAh rechargeable Lithium-ion battery
Run Time: Flash mode>30hrs, breath>14hrs, Constant>10hrs
Weight: 31g (Saddle mount), 36g (Seat post mount)
Color: Black, Red, Metal
Waterproof: IPx5
Input: DC 5V 300mA


Cubelite II integrated with a six-axis men’s sensor (Accelerometer and Gyroscope) which allow the light to detect if the bike is slowing down. The additional Gyroscope allow better response on bike angle change and therefore ensure more accurate braking detection. The upgraded 32-bit ARM processor ensure quicker response to braking.
The Cubelite II is able detect the ambient light intensity and automatically switching between the day running light and night light mode.
The Cubelite II also inherit the feature from it's product family - Auto start when motion is detected and Auto switch off if no motion is detected for 10s.
Front bottom
The functionality of the front bottom is described as below:
Operation | Function |
Single Click | Change the flash mode |
Double Click* | Switch between Auto and Manual mode |
Press down for more than 1s | Switch off ** |
Note:
*The “AUTO”LED indicator will start to blink when operate under Auto mode.
**The light will be reactivated in “Auto” mode if motion detected.
Operation and functionality are described shown as below:

1. Insert the light into the rubber band.

2. Fit the light on the seatpost with rubber band.

1. Place the mounting bracket on the seat rails and tighten the zip-ties. Cut excess length off if need.

2. Slide upward until the light is click-in.

The Cubelite II need to be charge when the low battery indicator is light up.
To charge the battery, press the click ① and remove the light downward ②. Open the seal and charge the battery by the USB micro port③. The battery will be fully charged in about 2 hours. A green light next to ③ will be turned on if charge completed.


The tail light is covered by one year warranty.

DongGuan Enfitnix Technology Co., Ltd.
Customer Service: ecs@enfitnix.com
Tel: +86 (0)768 2223 4810
Please Note: Specification are subject to change without notices.
© 2019 by Enfitnix Technology.
Made In China